2-way passive shell with weather resistant high-quality 15 inch sensor and high output 3 inch diaphragm compression driver, connected to cylindrical waveguide, with user adjustable directionality. The outer cabinet is made of high-quality Baltic beech and birch plywood. The front of the shell is protected by a coated steel grille and acoustic transparent fabric. The shell integrates two ergonomic handles and a panel corner stop for protection. Flush installation hardware allows for assembly and combination with other speakers in the same series to achieve coherent wave front source. The directionality of the line source is equal to N x 10 degrees (where N is the number of storage modules in the array). Through dedicated presets, exclusively driven and protected by a proprietary amplification controller.
technical requirement
Coverage range (-6 dB):
Directionality: 10 °
Directionality: 70 °/110 ° symmetric or 90 ° asymmetric
Low frequency transducer: 15 "cone driver
High frequency sensor: 3 "diaphragm compression driver
Impedance: 8 Ω
Available bandwidth:
41HZ-20KHZ (-10 DB)
44HZ -20 KHZ (-6 DB)
47 HZ -20 KHZ (-3 DB)
Power: 600W
Maximum sound pressure level: 144 dB
Physical data:
Acoustic load: bass reflection
Board: High quality Baltic beech and birch plywood
Dimensions (width, height, depth): 762mm, 427mm, 490mm/30in, 16.8in, 19.3in
Surface treatment: dark gray brown water-based paint
A15